PCI Modules

NI PCI and PCIe Modules

Types of NI PCI Modules

PCI Compared with PCI Express

A physically longer PCIe slot can often accept a shorter-lane card, but motherboard design and lane allocation can affect available bandwidth. Some computer slots also share lanes with graphics cards, storage controllers or other expansion hardware.

For legacy PCI hardware, confirm both the physical connector and its voltage keying. Do not assume that every computer advertised with an expansion slot supports every generation of PCI measurement device.

Representative NI PCI and PCIe Modules

These models represent major PCI module architectures rather than every device available in the NI product family. Verify the complete model number, hardware revision, connector, cable, driver and operating-system support before ordering.

How to Select an NI PCI Module

1. Identify the Measurement or Interface Function

Begin with the electrical signals and required task. Determine whether the system needs analog acquisition, analog generation, digital monitoring, counter measurement, high-speed waveform capture, sound and vibration acquisition, image capture, FPGA processing or communication with external equipment.

A multifunction DAQ card is appropriate when one system requires moderate numbers of analog, digital and counter channels. Specialized digitizers, dynamic signal devices, vision interfaces and FPGA cards are preferable when the application requires capabilities that are not available from general-purpose DAQ hardware.

2. Verify the Computer Expansion Slot

Inspect the host computer or motherboard to determine whether it provides PCI or PCI Express slots. For PCIe devices, check the physical slot size, available lanes, chipset allocation and whether another installed card blocks the required space.

Also confirm:

• Full-height or low-profile bracket requirements
• Computer power-supply capacity
• Cooling and airflow around the module
• Clearance for cables and adjacent expansion cards
• BIOS and chipset compatibility
• Operating-system and driver support

3. Record Every Required Signal

List all analog inputs, analog outputs, digital lines, counters, triggers, clocks and communication ports. For each signal, record its voltage range, source impedance, grounding arrangement, bandwidth, update rate and connector requirement.

General-purpose analog inputs normally measure voltage or already conditioned sensor signals. Thermocouples, RTDs, strain gauges, IEPE accelerometers, charge-mode sensors and other low-level transducers may require external signal conditioning or a dedicated sensor-measurement platform.

4. Select the Required Input Range and Resolution

Choose an input range that accommodates the complete expected signal, including offset, noise and normal overload conditions. Using an unnecessarily wide input range reduces the portion of the converter range used by the measurement.

ADC resolution alone does not determine system accuracy. Input noise, gain error, offset, temperature drift, source impedance, grounding and external interference also affect usable measurement performance.

5. Determine Sample Rate and Bandwidth

Select the required measurement bandwidth before comparing sample rates. Slow process signals may require only a few samples per second, while transient, acoustic and electronic waveform measurements can require much higher rates.

Check whether the published sample rate applies to each channel or is shared across all active channels. A multiplexed device samples channels sequentially through a shared converter, while a simultaneous-sampling device uses independent conversion paths to preserve interchannel timing.

6. Decide Between Multiplexed and Simultaneous Sampling

Multiplexed DAQ devices are suitable for general voltage acquisition, data logging and applications where small timing differences between channels are acceptable. They can provide a cost-effective combination of analog and digital functions.

Simultaneous sampling is important when phase relationships must be preserved, including:

• Power and energy measurements
• Sound and vibration analysis
• Strain, force and pressure correlation
• Motor and rotating-machinery testing
• Transient-event measurement
• Multichannel waveform comparison

7. Review Isolation and Grounding

Isolation can help manage common-mode voltage, ground-potential differences and industrial electrical noise. Confirm whether the module provides channel-to-channel, bank or bus isolation and verify the associated working-voltage limits.

Non-isolated devices require a carefully designed grounding arrangement. Differential measurement does not provide the same protection as electrical isolation. Long cables, grounded signal sources and machinery installations should be reviewed for ground-loop risk.

8. Confirm Triggering and Synchronization

Determine whether the application needs a digital start trigger, analog trigger, reference trigger, shared sample clock or external timebase. Software-started tasks do not necessarily begin at the same instant.

Hardware synchronization should be used when multiple cards must preserve phase, correlate events or coordinate input and output. Confirm whether the required timing signals can be routed internally through the computer system or must be connected through external terminals.

9. Calculate Data Throughput

For continuous acquisition, calculate the approximate payload rate:

Data rate = active channels × sample rate × transferred bytes per sample.

Include simultaneous input and output streams, digital data, image data, metadata and operating margin. The module, PCIe link, system memory, processor, application and storage device must all sustain the required transfer rate.

10. Confirm Cables and Terminal Accessories

PCI modules normally require an external cable and terminal block, breakout accessory, camera cable, communication cable or adapter module. The module and its connectivity should be selected as one complete assembly.

Verify:

• Board connector and cable part number
• Terminal-block compatibility
• Differential or single-ended wiring
• Shielding and cable-length requirements
• Required signal conditioning
• Connector pinout and legacy-fixture compatibility

PCI Data Acquisition and Analog I/O

PCI and PCIe DAQ devices acquire voltage and compatible conditioned sensor signals directly inside a computer. Multifunction devices may combine analog input, analog output, digital I/O and counters on one board, simplifying general-purpose automated test systems.

Important analog-input specifications include channel count, resolution, input range, maximum sample rate, analog bandwidth, input impedance, common-mode range and sampling architecture.

Analog outputs can generate control setpoints, simulated sensor signals, test stimuli and arbitrary waveforms where supported. Confirm output range, update rate, resolution, current capability, settling time and load impedance.

DAQ analog outputs are control-level signals. Motors, valves, heaters and other power loads normally require an external amplifier, driver or isolated power interface.

PCI Digital I/O and Counter/Timer Modules

Digital I/O modules monitor or control discrete electrical states. Applications include switches, alarms, relays, interlocks, fixture control and digital pattern validation. Selection depends on logic voltage, direction, isolation, output current and whether software-timed or hardware-timed operation is required.

Counter/timer devices measure compatible pulse signals and can perform event counting, frequency and period measurement, pulse-width measurement, encoder position acquisition and pulse-train generation.

Do not assume that every digital line supports counter, encoder or hardware-timed waveform functions. Dedicated timing resources and ordinary static digital I/O lines are different hardware functions.

PCI Dynamic Signal Acquisition

Dynamic signal acquisition devices are designed for sound, vibration and other high-dynamic-range measurements. They commonly provide simultaneous sampling, anti-alias filtering and precision input circuitry. Selected devices may also support IEPE sensor excitation and AC or DC coupling.

Important selection criteria include:

• Voltage or IEPE sensor compatibility
• Input coupling and range
• Frequency range and usable bandwidth
• Dynamic range and input noise
• Sample rate per channel
• Phase matching and synchronization
• Compatible analysis software

PCI High-Speed Digitizers

PCI and PCIe digitizers capture fast waveforms and transient events using oscilloscope-style acquisition hardware. They are used for pulse testing, electronic characterization, communications analysis and scientific measurement.

Choose a digitizer by analog bandwidth, real-time sample rate, vertical resolution, input range, onboard memory, channel count, trigger capability and sustained data-transfer requirement.

Sample rate and analog bandwidth are not interchangeable specifications. The analog front end must pass the signal content, while the converter must sample it at a rate appropriate for the waveform and measurement method.

PCI FPGA and RIO Devices

PCI and PCIe RIO devices combine reconfigurable FPGA processing with digital or mixed-signal I/O. Instead of using only fixed measurement functions, engineers can implement custom timing, triggering, protocols, filtering and closed-loop logic directly in hardware.

FPGA selection should consider:

• FPGA family and available logic resources
• Digital or analog I/O configuration
• Clock rates and timing resolution
• Required DMA channels and host throughput
• Adapter module or cable compatibility
• LabVIEW FPGA and driver licensing
• Compilation and application-maintenance requirements

FPGA hardware is appropriate for applications requiring customization or deterministic processing. A standard DAQ card may be simpler when the task only requires conventional analog, digital or counter measurements.

PCI Vision Acquisition

PCI vision-acquisition devices transfer image data from compatible industrial cameras into a computer for inspection and analysis. Applications include defect detection, dimensional measurement, alignment, identification and machine guidance.

Verify the camera interface, resolution, pixel format, pixel clock, frame rate, cable, trigger signals and camera power arrangement. Camera Link, GigE Vision and other camera standards are not interchangeable merely because they perform image acquisition.

System throughput must support the complete image stream:

Image data rate = width × height × bytes per pixel × frames per second.

Include protocol overhead, multiple cameras and image-processing requirements when selecting the host computer.

PCI Industrial Communication Interfaces

Industrial communication cards connect the computer to instruments, vehicle networks and automation equipment. Depending on the model, supported interfaces may include CAN, LIN, FlexRay, serial communication or GPIB.

Selection requires the exact protocol, transceiver type, port quantity, maximum data rate, isolation, termination, connector, cable and software driver. A physical connector does not by itself identify the supported communication standard.

For vehicle-network interfaces, confirm whether the application requires monitoring, frame transmission, database-based signal conversion, bus simulation or synchronized communication with measurement channels.

MXI Interfaces for PXI System Control

MXI interfaces allow an external computer to control a compatible PXI or PXI Express chassis. A typical system includes a host-interface card, chassis-side interface and matched MXI cable.

The complete MXI generation and connection path must be compatible. Do not combine host cards, chassis interfaces and cables from unrelated MXI families based only on connector appearance.

For high-throughput systems, include the MXI connection in the bandwidth calculation. A high-performance PXIe chassis cannot overcome a slower host link.

Software and Driver Compatibility

The required NI driver depends on the module family. Common examples include:

NI Measurement & Automation Explorer can be used with supported devices to confirm recognition, inspect installed drivers, run self-tests and review hardware resources. LabVIEW, C/C++, .NET, Python and other environments may be used where supported by the applicable driver.

Legacy PCI cards may depend on older driver releases or operating systems. Verify the complete hardware and software stack before upgrading the computer or application.

PCI Modules Compared with USB and PXI

Типичные применения

• Automated production and functional testing
• Laboratory measurement and engineering research
• Industrial machine monitoring and control
• Electronic component and circuit validation
• Voltage, current and conditioned sensor acquisition
• Analog stimulus and sensor simulation
• Digital test fixtures and relay control
• Encoder, frequency, PWM and event measurement
• Sound, vibration and NVH analysis
• High-speed waveform and transient capture
• Machine vision and automated inspection
• CAN, LIN, FlexRay, serial and GPIB communication
• FPGA-based custom protocols and real-time processing
• Automotive, aerospace and semiconductor validation
• Maintenance of established legacy test systems

Legacy PCI Module Replacement

Replacing a legacy PCI card with a newer PCIe device requires more than matching its channel count. The replacement may use a different computer interface, connector, cable, terminal block, sampling architecture, timing route or driver API.

Compare the following before approving a replacement:

• PCI or PCI Express bus compatibility
• Module height, bracket and mechanical clearance
• Analog input and output channel quantities
• Digital I/O and counter resources
• Input range, output range and signal levels
• Resolution, sample rate and analog bandwidth
• Multiplexed or simultaneous-sampling architecture
• Isolation, grounding and common-mode limits
• Trigger, clock and synchronization capabilities
• Connector, cable and terminal-block pinout
• Driver, operating-system and application-code support

Requalify the replacement using the actual test fixture, sensors, signal sources, acquisition duration and pass/fail limits before returning the system to production.

PCI Module Procurement and RFQ Guide

For pre-owned PCI hardware, request device-recognition and functional test results. Inspect the external connector, computer-bus edge connector, bracket and board components for damage or contamination.

Часто задаваемые вопросы

What is the difference between PCI and PCIe modules?

PCI uses a legacy shared parallel bus, while PCI Express uses point-to-point serial links. Their physical connectors and electrical interfaces are different, so the module must match the computer slot.

Can a PCI module be installed in a PCIe slot?

No. Conventional PCI cards and PCI Express cards are not mechanically or electrically interchangeable.

Can a PCI DAQ module measure sensors directly?

It can measure sensors that provide compatible voltage or current signals. Thermocouples, RTDs, strain gauges, IEPE sensors and other transducers requiring excitation or dedicated conditioning may need external signal-conditioning hardware.

When is simultaneous sampling required?

Simultaneous sampling is important when phase and timing relationships between channels must be preserved, such as power, vibration, dynamic strain and multichannel transient measurements.

Should I choose a multifunction DAQ card or a digitizer?

Choose multifunction DAQ for mixed analog, digital and counter functions at general-purpose acquisition rates. Choose a digitizer when the application requires higher analog bandwidth, faster waveform sampling, deeper acquisition memory or oscilloscope-style triggering.

When should I use a PCI FPGA device?

Use an FPGA or RIO device when the application requires custom hardware timing, unusual digital protocols, deterministic processing or low-latency control that cannot be implemented with a fixed-function DAQ device.

Can a newer PCIe module directly replace an older PCI card?

Not automatically. Compare signal ranges, channel count, sampling architecture, timing functions, connectors, cables, driver support and application code before approving the replacement.

Are cables and terminal blocks included with every PCI module?

They should not be assumed to be included. Verify the module connector and order the compatible cable, terminal block, breakout accessory or adapter required by the application.

Related NI Measurement Platforms

NI PCI Modules from PXISOURCE

PXISOURCE supports engineers, system integrators and procurement teams with NI PCI and PCIe module selection, computer compatibility review, cable and terminal-block matching, software verification and legacy-system replacement. Send the required model, measurement function, signal specifications, computer configuration and software version for a technically matched quotation.