USB-6211 16-Bit USB Multifunction DAQ Device
Земля NI USB-6211 is a bus-powered multifunction data acquisition device with analog input, analog output, digital I/O and counter functions. It is designed for portable measurement, laboratory automation, education and electronic test applications.
The USB-6211 provides 16 single-ended or eight differential analog inputs sampled at up to 250 kS/s aggregate. Two 16-bit analog outputs can generate voltage signals at up to 250 kS/s per channel.
Key Features of the USB-6211
- 16 single-ended or 8 differential analog inputs
- 16-bit ADC resolution
- 250 kS/s aggregate analog input rate
- Two 16-bit analog outputs
- 250 kS/s maximum update rate per analog output
- ±10 V analog output range
- Four static digital inputs
- Four static digital outputs
- Two 32-bit counters
- USB 2.0 Hi-Speed connectivity
- USB bus-powered operation
- NI-DAQmx software support
USB-6211 Technical Specifications
| Product Model | USB-6211 |
|---|---|
| Analog Inputs | 16 single-ended or 8 differential |
| Analog Input Resolution | 16 bits |
| Maximum Input Rate | 250 kS/s aggregate |
| Input Ranges | ±0.2 V, ±1 V, ±5 V and ±10 V |
| Input Bandwidth | 450 kHz |
| Analog Outputs | 2 |
| Analog Output Resolution | 16 bits |
| Maximum Output Rate | 250 kS/s per channel |
| Output Range | ±10 V |
| Output Current Drive | ±2 mA |
| Digital Inputs | 4 |
| Digital Outputs | 4 |
| Counters | 2 × 32-bit |
| Bus | USB 2.0 Hi-Speed |
| Power | USB bus powered |
| Calibration Interval | 1 year |
USB-6211 Part Number and Accessories
The USB-6211 is available in a compact screw-terminal enclosure. Verify the exact orderable part number, included USB cable and current lifecycle status before purchasing.
| Accessory | Purpose |
|---|---|
| USB Type-A to Type-B Cable | Power and computer communication |
| DIN-Rail Mounting Kit | Control-cabinet installation |
| Replacement Terminal Plugs | Custom sensor and fixture wiring |
Analog Input and Output Integration
The USB-6211 can measure a device response while generating a control or stimulus voltage from the same DAQ unit. This makes it suitable for closed-loop laboratory experiments and automated component tests.
Each analog output provides a ±10 V range with 16-bit resolution. External amplifiers are required when the connected load needs more than the specified output current.
Hardware Timing and Counters
Hardware-timed analog input and output improve repeatability compared with software-controlled sampling. Two counters support event counting, encoder measurements, frequency measurement and pulse generation.
USB-6211 Applications
- Portable data acquisition
- Sensor measurement
- Voltage stimulus and response testing
- Laboratory automation
- Educational control experiments
- Electronic device validation
- Encoder and pulse measurement
Stimulus-and-Response Testing
One or both analog outputs can provide a programmable voltage while the analog inputs measure the resulting DUT response. Observe output-current limits and use suitable external buffering when necessary.
USB-6211 Installation Workflow
Step 1: Install NI-DAQmx
Install compatible NI-DAQmx software before connecting and configuring the device.
Step 2: Select the Input Wiring Mode
Choose differential, RSE or NRSE operation based on signal grounding and noise conditions.
Step 3: Connect the USB-6211
Use a known-good USB cable and connect directly to a Hi-Speed USB port.
Step 4: Verify I/O Channels
Run self-test and test-panel operations in NI MAX before developing the final application.
Step 5: Configure Timing and Triggers
Set sampling rates, output update rates, trigger sources and acquisition duration.
USB-6211 Troubleshooting
Analog Input Measurements Are Unstable
Verify grounding, select differential input mode and reduce source impedance where possible.
No Analog Output Is Present
Check the physical AO channel, output range, task state and load impedance.
The Output Voltage Drops Under Load
The analog output is limited to approximately ±2 mA. Use an external buffer or amplifier for heavier loads.
The Device Is Not Detected
Check NI-DAQmx, the USB port and cable. Avoid unpowered hubs and confirm adequate USB power.
USB-6211 Comparison
| Модель | Analog Inputs | Analog Outputs | Изоляция |
|---|---|---|---|
| USB-6210 | 16 at 250 kS/s | Ничего | No |
| USB-6211 | 16 at 250 kS/s | 2 at 250 kS/s | No |
| USB-6215 | 16 at 250 kS/s | 2 at 250 kS/s | Да |
Select the USB-6211 for general-purpose measurement and analog control. Choose the USB-6215 when isolation between the USB host and measurement circuitry is required.
USB-6211 Frequently Asked Questions
Does the USB-6211 generate analog signals?
Yes. It provides two 16-bit analog outputs with a ±10 V range.
What is the analog input sample rate?
The maximum aggregate analog input rate is 250 kS/s.
Is the USB-6211 isolated?
No. Consider the USB-6215 or USB-6216 when USB-bus isolation is required.
Can it measure an encoder?
Yes. Its two 32-bit counters support quadrature-encoder position measurements.
Recommended Related Products
Request a Quote for the USB-6211
Contact us for availability and project pricing for the NI USB-6211 multifunction DAQ device. We can also help select compatible mounting and terminal accessories.
