\u0417\u0435\u043c\u043b\u044f NI USB-6000<\/strong> is a compact, bus-powered USB data acquisition device designed for basic voltage measurement, data logging, education and portable test applications. It combines eight single-ended analog input channels, four individually configurable digital I\/O lines and one 32-bit counter in an economical desktop format.<\/p>\n The device provides 12-bit analog input resolution, an aggregate sampling rate of up to 10 kS\/s and a fixed \u00b110 V input range. Its removable screw-terminal connector simplifies connection to sensors, test fixtures and laboratory circuits without requiring a dedicated external terminal block.<\/p>\n The USB-6000 provides eight single-ended voltage-input channels with 12-bit resolution. All channels share the aggregate 10 kS\/s sampling rate, so the effective per-channel rate decreases when several channels are included in the same acquisition task.<\/p>\n The \u00b110 V range is suitable for many conditioned sensor outputs, laboratory circuits and low-voltage electronic signals. Sensors that produce current, resistance, thermocouple-level or bridge-level outputs generally require suitable external signal conditioning.<\/p>\n Four digital lines can be individually configured as inputs or outputs. Output lines support active-drive and open-collector operation, allowing the device to monitor logic states or control low-current indicators and interface circuits.<\/p>\n The onboard 32-bit counter supports rising-edge or falling-edge counting at input frequencies up to 5 MHz. Typical uses include event counting, pulse detection, production-piece counting and basic encoder-related experiments.<\/p>\n USB-6000 ordering numbers can differ according to region, packaging and lifecycle status. Confirm the complete model, connector kit and part number printed on the product label before ordering a replacement.<\/p>\n The compact enclosure and direct screw-terminal access make the USB-6000 useful for teaching voltage measurement, sampling, digital logic and event-counting concepts. Students can build NI-DAQmx applications without installing a PXI chassis or desktop PCI card.<\/p>\n Because the USB connection provides communication and operating power, the device can be used with a laptop for temporary measurements and field troubleshooting. The complete setup should still provide appropriate grounding, shielding and protection from signals outside the specified range.<\/p>\n Install a version of NI-DAQmx that supports the USB-6000 and the computer operating system before connecting the device.<\/p>\n Connect the USB-6000 directly to a powered USB port. A passive or bus-powered hub may not provide sufficient current for reliable operation.<\/p>\n Open NI Measurement & Automation Explorer, confirm that the USB-6000 is detected and run a self-test.<\/p>\n Connect analog inputs to AI0 through AI7 and use AI GND as the measurement reference. Observe the \u00b110 V operating range and Measurement Category I limitation.<\/p>\n Configure the channels, sampling rate, sample count and trigger settings, then test the acquisition before integrating it into the final application.<\/p>\n Verify the USB cable, computer port and NI-DAQmx installation. Connect the device directly to the computer instead of using an unpowered USB hub.<\/p>\n Check grounding, shielding and cable routing. Keep analog wiring away from switching power supplies, motors and high-current conductors, and average multiple samples when appropriate.<\/p>\n The specified 10 kS\/s rate is aggregate across the active analog input channels. Divide the available rate among the channels included in the acquisition task.<\/p>\n The digital lines are low-current logic outputs rather than power outputs. Use an external buffer, transistor, relay driver or isolated interface for loads requiring more than the specified current.<\/p>\n Confirm that the pulse amplitude, frequency and high\/low times meet the input requirements. Also check the PFI 0 wiring and selected counter edge.<\/p>\n Choose the USB-6000 when cost, portability and simple voltage acquisition are more important than high sampling speed or measurement resolution. Select a higher-performance USB DAQ device when the application requires differential inputs, analog outputs, faster waveform acquisition or greater accuracy.<\/p>\n It provides eight single-ended analog input channels.<\/p>\n The maximum aggregate analog input sampling rate is 10 kS\/s.<\/p>\n No. The USB-6000 provides analog inputs, digital I\/O and a counter but does not include analog output channels.<\/p>\n It can read voltage, but accurate thermocouple measurements normally require amplification, filtering and cold-junction compensation.<\/p>\n The device is controlled through NI-DAQmx and can be programmed using LabVIEW and other supported development environments.<\/p>\nKey Features of the USB-6000<\/h3>\n
\n
USB-6000 Technical Specifications<\/h2>\n
\n\n
\n Product Model<\/th>\n USB-6000<\/td>\n<\/tr>\n \n Product Type<\/th>\n Multifunction USB data acquisition device<\/td>\n<\/tr>\n \n Analog Input Channels<\/th>\n 8 single-ended<\/td>\n<\/tr>\n \n Analog Input Resolution<\/th>\n 12 bits<\/td>\n<\/tr>\n \n Maximum Sample Rate<\/th>\n 10 kS\/s aggregate, system dependent<\/td>\n<\/tr>\n \n ADC Type<\/th>\n Successive approximation<\/td>\n<\/tr>\n \n Input Range<\/th>\n \u00b110 V<\/td>\n<\/tr>\n \n Input Impedance<\/th>\n Greater than 1 M\u03a9<\/td>\n<\/tr>\n \n Analog Input FIFO<\/th>\n 2,047 samples<\/td>\n<\/tr>\n \n Trigger Sources<\/th>\n Software or PFI 1<\/td>\n<\/tr>\n \n \u0426\u0438\u0444\u0440\u043e\u0432\u043e\u0439 \u0432\u0432\u043e\u0434-\u0432\u044b\u0432\u043e\u0434<\/th>\n 4 individually configurable lines<\/td>\n<\/tr>\n \n Digital Output Modes<\/th>\n Active drive or open collector<\/td>\n<\/tr>\n \n Maximum Digital Output Current<\/th>\n \u00b14 mA per line in active-drive mode<\/td>\n<\/tr>\n \n Counter<\/th>\n 1 \u00d7 32-bit edge counter<\/td>\n<\/tr>\n \n Maximum Counter Frequency<\/th>\n 5 MHz<\/td>\n<\/tr>\n \n USB Interface<\/th>\n USB Full-Speed, 12 Mb\/s<\/td>\n<\/tr>\n \n USB Connector<\/th>\n Micro-B receptacle<\/td>\n<\/tr>\n \n I\/O Connector<\/th>\n 16-position removable screw-terminal plug<\/td>\n<\/tr>\n \n Power<\/th>\n USB bus powered, 150 mA maximum<\/td>\n<\/tr>\n \n Weight<\/th>\n 84 g with screw-terminal connector<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n 12-Bit Analog Input Measurement<\/h3>\n
Digital I\/O and Counter Functions<\/h3>\n
USB-6000 Part Number and Accessories<\/h2>\n
\n\n
\n Item<\/th>\n \u041e\u043f\u0438\u0441\u0430\u043d\u0438\u0435<\/th>\n<\/tr>\n \n USB-6000<\/td>\n Eight-channel, 12-bit multifunction USB DAQ device<\/td>\n<\/tr>\n \n 16-Position Screw-Terminal Plug<\/td>\n Removable connector for analog, digital and counter wiring<\/td>\n<\/tr>\n \n USB Micro-B Cable<\/td>\n Connects the device to the host computer and supplies operating power<\/td>\n<\/tr>\n \n Shielded Signal Cable<\/td>\n Recommended for low-level signals and electrically noisy environments<\/td>\n<\/tr>\n \n External Signal Conditioning<\/td>\n Used with thermocouples, current loops, bridges and other non-voltage sensors<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n USB-6000 Applications<\/h2>\n
\n
Education and Laboratory Use<\/h3>\n
Portable Monitoring Systems<\/h3>\n
USB-6000 Installation Workflow<\/h2>\n
Step 1: Install NI-DAQmx<\/h4>\n
Step 2: Connect the USB Cable<\/h4>\n
Step 3: Verify the Device<\/h4>\n
Step 4: Wire the Signals<\/h4>\n
Step 5: Create the DAQmx Task<\/h4>\n
USB-6000 Troubleshooting<\/h2>\n
The USB-6000 is not detected<\/h4>\n
Analog readings are noisy<\/h4>\n
Multiple channels sample more slowly than expected<\/h4>\n
A digital output cannot drive the load<\/h4>\n
Counter measurements miss pulses<\/h4>\n
USB-6000 Comparison<\/h2>\n
\n\n
\n \u041c\u043e\u0434\u0435\u043b\u044c<\/th>\n Analog Input<\/th>\n Best Suited For<\/th>\n<\/tr>\n \n USB-6000<\/td>\n 8 SE, 12-bit, 10 kS\/s<\/td>\n Basic and economical USB measurements<\/td>\n<\/tr>\n \n USB-6210<\/a><\/td>\n 16-bit multifunction DAQ<\/td>\n Higher-accuracy and higher-speed acquisition<\/td>\n<\/tr>\n \n USB-6211<\/a><\/td>\n 16-bit multifunction DAQ with analog output<\/td>\n Combined acquisition and voltage generation<\/td>\n<\/tr>\n \n USB-6251<\/a><\/td>\n Higher-performance M Series DAQ<\/td>\n Faster laboratory and automated testing<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Selecting the USB-6000<\/h3>\n
USB-6000 Frequently Asked Questions<\/h2>\n
How many analog input channels does the USB-6000 have?<\/h4>\n
What is its maximum sampling rate?<\/h4>\n
Does the USB-6000 provide analog outputs?<\/h4>\n
Can it measure thermocouples directly?<\/h4>\n
Which driver controls the USB-6000?<\/h4>\n
Request a Quote for the USB-6000<\/h3>\n