{"id":30248,"date":"2025-09-26T13:06:35","date_gmt":"2025-09-26T05:06:35","guid":{"rendered":"https:\/\/pxisource.com\/?post_type=product&#038;p=30248"},"modified":"2026-08-30T20:32:31","modified_gmt":"2026-08-30T12:32:31","slug":"pxi-6713","status":"publish","type":"product","link":"https:\/\/pxisource.com\/ru\/product\/pxi-6713\/","title":{"rendered":"PXI-6713"},"content":{"rendered":"<h3>PXI-6713 8-Channel High-Speed Analog Output Module<\/h3>\n<p>\u0417\u0435\u043c\u043b\u044f <strong>PXI-6713<\/strong> is a high-speed PXI analog output module designed for multichannel waveform generation, deterministic control, sensor simulation and stimulus-response testing. It provides eight independent voltage output channels with 12-bit resolution and a standard output range of \u00b110 V.<\/p>\n<p>Up to five channels can update at 1 MS\/s per channel when using onboard waveform memory. The module also provides eight 5 V TTL\/CMOS digital I\/O lines, two 24-bit counter\/timers, digital triggering, external clocking and PXI backplane synchronization.<\/p>\n<h3>Key Features of the PXI-6713<\/h3>\n<ul>\n<li>Eight independent analog voltage outputs<\/li>\n<li>Simultaneous multichannel updating<\/li>\n<li>12-bit analog output resolution<\/li>\n<li>Up to 1 MS\/s update rate per channel<\/li>\n<li>\u00b110 V standard output range<\/li>\n<li>External voltage reference support<\/li>\n<li>Approximately 20 V\/\u00b5s typical slew rate<\/li>\n<li>Approximately 3 \u00b5s full-scale settling time<\/li>\n<li>\u00b15 mA maximum output current drive<\/li>\n<li>16,384-sample onboard waveform FIFO<\/li>\n<li>Periodic and nonperiodic waveform generation<\/li>\n<li>Eight 5 V TTL\/CMOS digital I\/O lines<\/li>\n<li>Two 24-bit, 20 MHz counter\/timers<\/li>\n<li>Digital start triggering<\/li>\n<li>Internal and external update clocking<\/li>\n<li>PXI trigger-bus synchronization<\/li>\n<li>68-pin SCSI-type front connector<\/li>\n<li>PXI hybrid-slot compatible<\/li>\n<li>NI-DAQmx software support<\/li>\n<\/ul>\n<h3>PXI-6713 Technical Specifications<\/h3>\n<table>\n<tbody>\n<tr>\n<th>Product Model<\/th>\n<td>PXI-6713<\/td>\n<\/tr>\n<tr>\n<th>Part Numbers<\/th>\n<td>777795-01 and 185860-01<\/td>\n<\/tr>\n<tr>\n<th>Product Type<\/th>\n<td>High-speed PXI analog output module<\/td>\n<\/tr>\n<tr>\n<th>\u0428\u0438\u043d\u043d\u044b\u0439 \u0438\u043d\u0442\u0435\u0440\u0444\u0435\u0439\u0441<\/th>\n<td>PXI hybrid<\/td>\n<\/tr>\n<tr>\n<th>Analog Output Channels<\/th>\n<td>8 voltage outputs<\/td>\n<\/tr>\n<tr>\n<th>Analog Output Resolution<\/th>\n<td>12 bits<\/td>\n<\/tr>\n<tr>\n<th>Simultaneous Updating<\/th>\n<td>\u0414\u0430<\/td>\n<\/tr>\n<tr>\n<th>Standard Output Range<\/th>\n<td>\u00b110 V<\/td>\n<\/tr>\n<tr>\n<th>External Voltage Reference<\/th>\n<td>Supported<\/td>\n<\/tr>\n<tr>\n<th>DAC Architecture<\/th>\n<td>Double-buffered multiplying DAC<\/td>\n<\/tr>\n<tr>\n<th>Output Coupling<\/th>\n<td>DC<\/td>\n<\/tr>\n<tr>\n<th>Maximum Current Drive<\/th>\n<td>\u00b15 mA per channel<\/td>\n<\/tr>\n<tr>\n<th>Typical Slew Rate<\/th>\n<td>20 V\/\u00b5s<\/td>\n<\/tr>\n<tr>\n<th>Typical Full-Scale Settling Time<\/th>\n<td>Approximately 3 \u00b5s to within \u00b11 LSB<\/td>\n<\/tr>\n<tr>\n<th>Output FIFO<\/th>\n<td>16,384 samples<\/td>\n<\/tr>\n<tr>\n<th>Waveform Modes<\/th>\n<td>Periodic, nonperiodic, finite and continuous generation<\/td>\n<\/tr>\n<tr>\n<th>Digital I\/O Lines<\/th>\n<td>8 bidirectional 5 V TTL\/CMOS lines<\/td>\n<\/tr>\n<tr>\n<th>Counter\/Timers<\/th>\n<td>2<\/td>\n<\/tr>\n<tr>\n<th>Counter Resolution<\/th>\n<td>24 bits<\/td>\n<\/tr>\n<tr>\n<th>Counter Timebase<\/th>\n<td>20 MHz<\/td>\n<\/tr>\n<tr>\n<th>\u0417\u0430\u043f\u0443\u0441\u043a<\/th>\n<td>Digital triggering<\/td>\n<\/tr>\n<tr>\n<th>Clocking<\/th>\n<td>Internal or external update clock<\/td>\n<\/tr>\n<tr>\n<th>Front Connection<\/th>\n<td>68-pin SCSI type<\/td>\n<\/tr>\n<tr>\n<th>PXI Synchronization<\/th>\n<td>PXI trigger bus and reference-clock resources<\/td>\n<\/tr>\n<tr>\n<th>Module Format<\/th>\n<td>3U PXI<\/td>\n<\/tr>\n<tr>\n<th>\u041f\u043e\u0434\u0434\u0435\u0440\u0436\u043a\u0430 \u043f\u0440\u043e\u0433\u0440\u0430\u043c\u043c\u043d\u043e\u0433\u043e \u043e\u0431\u0435\u0441\u043f\u0435\u0447\u0435\u043d\u0438\u044f<\/th>\n<td>\u041d\u0418-DAQmx<\/td>\n<\/tr>\n<tr>\n<th>Lifecycle Status<\/th>\n<td>Discontinued with limited NI support<\/td>\n<\/tr>\n<tr>\n<th>Recommended NI Replacement<\/th>\n<td>PXIe-6738, part number 783800-01<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>PXI-6713 Maximum Update Rates<\/h3>\n<table>\n<tbody>\n<tr>\n<th>Active Channels<\/th>\n<th>Using Onboard FIFO<\/th>\n<th>Using Host Memory<\/th>\n<\/tr>\n<tr>\n<td>1<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<\/tr>\n<tr>\n<td>2<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<\/tr>\n<tr>\n<td>3<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<\/tr>\n<tr>\n<td>4<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<\/tr>\n<tr>\n<td>5<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<\/tr>\n<tr>\n<td>6<\/td>\n<td>952 kS\/s per channel<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441 \u043d\u0430 \u043a\u0430\u043d\u0430\u043b<\/td>\n<\/tr>\n<tr>\n<td>7<\/td>\n<td>833 kS\/s per channel<\/td>\n<td>869 kS\/s per channel<\/td>\n<\/tr>\n<tr>\n<td>8<\/td>\n<td>740 kS\/s per channel<\/td>\n<td>769 kS\/s per channel<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Maximum continuous update rate depends on the number of active channels and whether waveform data is regenerated from the onboard FIFO or transferred from host memory. Actual host-streaming performance also depends on controller speed, PXI bus activity and application design.<\/p>\n<h3>PXI-6713 Part Number and Accessories<\/h3>\n<table>\n<tbody>\n<tr>\n<th>Item<\/th>\n<th>Part Number<\/th>\n<th>\u041e\u043f\u0438\u0441\u0430\u043d\u0438\u0435<\/th>\n<\/tr>\n<tr>\n<td>PXI-6713<\/td>\n<td>777795-01<\/td>\n<td>Complete eight-channel, 12-bit PXI analog output module configuration<\/td>\n<\/tr>\n<tr>\n<td>PXI-6713 Board<\/td>\n<td>185860-01<\/td>\n<td>PXI-6713 analog output board configuration<\/td>\n<\/tr>\n<tr>\n<td>SH68-68-EPM Cable<\/td>\n<td>199006-01<\/td>\n<td>1 m recommended shielded 68-pin cable<\/td>\n<\/tr>\n<tr>\n<td>SH68-68-EPM Cable<\/td>\n<td>199006-02<\/td>\n<td>2 m recommended shielded 68-pin cable<\/td>\n<\/tr>\n<tr>\n<td>R6868 Cable<\/td>\n<td>182482-01<\/td>\n<td>1 m low-cost unshielded 68-pin cable<\/td>\n<\/tr>\n<tr>\n<td>SCB-68A<\/td>\n<td>782536-01<\/td>\n<td>Shielded 68-pin screw-terminal connector block<\/td>\n<\/tr>\n<tr>\n<td>BNC-2110<\/td>\n<td>777643-01<\/td>\n<td>BNC terminal accessory for analog, digital and timing connections<\/td>\n<\/tr>\n<tr>\n<td>TB-2705<\/td>\n<td>778241-01<\/td>\n<td>PXI-mounted screw-terminal block that connects directly to the module<\/td>\n<\/tr>\n<tr>\n<td>TBX-68<\/td>\n<td>777141-01<\/td>\n<td>DIN-rail-mountable 68-pin screw-terminal block<\/td>\n<\/tr>\n<tr>\n<td>CB-68LP<\/td>\n<td>777145-01<\/td>\n<td>Low-cost vertical-mount 68-pin connector block<\/td>\n<\/tr>\n<tr>\n<td>CB-68LPR<\/td>\n<td>777145-02<\/td>\n<td>Low-cost right-angle 68-pin connector block<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The PXI-6713 uses a 68-pin SCSI-type front connector. The recommended SH68-68-EPM cable connects the module to accessories such as the SCB-68A, BNC-2110 or TBX-68. The TB-2705 attaches directly to the PXI module and does not require a separate cable.<\/p>\n<h3>Eight Independent Voltage Outputs<\/h3>\n<p>The PXI-6713 provides eight independent analog voltage outputs. Each channel can generate a different waveform, setpoint or simulated sensor signal, allowing one module to replace several individual waveform or control instruments.<\/p>\n<p>Dedicated DAC channels preserve the timing relationship between outputs. Engineers can create multichannel signals with controlled phase, amplitude and frequency relationships.<\/p>\n<h3>Simultaneous Multichannel Updating<\/h3>\n<p>All active output channels latch their new values simultaneously. This avoids the interchannel delay associated with multiplexed analog output modules and is important for phase-sensitive and multiaxis applications.<\/p>\n<p>Simultaneous updates are useful for three-phase signal simulation, multiaxis actuator commands, coordinated power-supply programming and sensor-array simulation.<\/p>\n<h3>12-Bit Analog Output Resolution<\/h3>\n<p>The output DACs provide 12-bit resolution, equivalent to 4,096 theoretical voltage levels. Across the standard \u00b110 V range, one ideal least-significant bit represents approximately 4.88 mV.<\/p>\n<p>Actual output accuracy depends on gain error, offset error, noise, reference accuracy, temperature and calibration. A 16-bit module should be considered when finer voltage increments are required.<\/p>\n<h3>\u00b110 V Output Range<\/h3>\n<p>Each channel provides a standard voltage range of -10 V to +10 V. This range is commonly used by laboratory instruments, programmable power supplies, industrial controllers and electronic test fixtures.<\/p>\n<p>The outputs are ground referenced and do not provide galvanic isolation. Add external isolation when the controlled system operates at a different ground potential or requires protection from common-mode voltage.<\/p>\n<h3>External Voltage Reference<\/h3>\n<p>The multiplying DAC architecture allows the output channels to use the onboard reference or a compatible external voltage reference. An external reference can scale the effective output span for an application that does not require the full \u00b110 V range.<\/p>\n<p>The external reference must provide adequate stability, current capacity and low noise. Reference and analog output terminals must remain within their specified voltage limits.<\/p>\n<h3>High-Speed Waveform Generation<\/h3>\n<p>The PXI-6713 can generate sine, square, triangular, sawtooth and arbitrary waveforms. Users define each voltage point and the hardware update clock determines when successive samples are applied to the outputs.<\/p>\n<p>The maximum practical waveform frequency depends on the number of samples per cycle, active channel count and required signal fidelity. More samples per period improve waveform representation but reduce the resulting fundamental frequency.<\/p>\n<h3>16,384-Sample Onboard FIFO<\/h3>\n<p>A 16,384-sample onboard FIFO buffers analog output data. Short periodic waveforms can be regenerated from this memory without transferring every sample repeatedly across the PXI bus.<\/p>\n<p>The FIFO is twice the size of the buffer provided by the four-channel PXI-6711. Buffer management is handled through NI-DAQmx according to the selected finite, continuous and regeneration settings.<\/p>\n<h3>Periodic Waveform Regeneration<\/h3>\n<p>Periodic regeneration repeatedly outputs data stored in the onboard or host buffer. This is appropriate for continuous sine waves, cyclic test patterns and repeating simulated sensor signals.<\/p>\n<p>Using onboard regeneration reduces host-processor and PXI-bus activity. The waveform must fit within the available buffer allocation for the active channels.<\/p>\n<h3>Nonperiodic Waveform Generation<\/h3>\n<p>Nonperiodic generation produces a finite or continuously changing sequence. It can reproduce startup profiles, ramps, transients, fault conditions and prerecorded control signals.<\/p>\n<p>Continuous streaming requires the host controller to supply data faster than the output hardware consumes it. Insufficient throughput causes a buffer-underflow error.<\/p>\n<h3>Fast Slew Rate and Settling<\/h3>\n<p>The output circuitry has a typical slew rate of approximately 20 V\/\u00b5s and typically settles to within \u00b11 LSB of a full-scale transition in approximately 3 \u00b5s.<\/p>\n<p>Settling time can increase with capacitive loading, long cables and low-impedance equipment. Verify performance with the actual fixture and load when output accuracy immediately after a transition is important.<\/p>\n<h3>\u00b15 mA Output Drive<\/h3>\n<p>Each channel can drive approximately \u00b15 mA within the specified conditions. This is sufficient for many high-impedance control and instrumentation inputs.<\/p>\n<p>The PXI-6713 should not be used to directly power motors, lamps, solenoids or other significant loads. Add an external buffer or power amplifier when additional output current is required.<\/p>\n<h3>Sensor and Signal Simulation<\/h3>\n<p>The eight outputs can simulate voltage-output sensors and electronic control signals. Test programs can reproduce normal operation, changing conditions, drift, noise, intermittent behavior and programmed fault states.<\/p>\n<p>Multiple channels can simulate related sensors with precisely controlled timing. This is useful for validating electronic controllers without connecting the complete physical system.<\/p>\n<h3>Stimulus-Response Testing<\/h3>\n<p>The PXI-6713 can generate voltage stimulus while separate PXI instruments measure the response of a device under test. Shared clocks and triggers provide a repeatable timing relationship between generation and acquisition.<\/p>\n<p>Typical applications include amplifier testing, filter characterization, control-loop evaluation and electromechanical response testing.<\/p>\n<h3>Power-Supply and Load Programming<\/h3>\n<p>Analog outputs can control compatible programming inputs on power supplies, electronic loads and amplifiers. Each channel can provide a static value, ramp or dynamic profile.<\/p>\n<p>Verify the equipment\u2019s programming-input voltage, polarity, input impedance and grounding. Do not connect the PXI-6713 output to a supply\u2019s high-energy power terminals.<\/p>\n<h3>Deterministic Control<\/h3>\n<p>Hardware-timed generation provides more repeatable output timing than software-timed writes. The module can execute preloaded control profiles without requiring the host operating system to command every point individually.<\/p>\n<p>Overall control-loop determinism depends on the controller, operating system, acquisition hardware and software architecture. The PXI-6713 is not an FPGA-based module.<\/p>\n<h3>Eight Digital I\/O Lines<\/h3>\n<p>The PXI-6713 includes eight bidirectional 5 V TTL\/CMOS digital I\/O lines. These channels can control external logic, monitor status signals or support test-fixture sequencing.<\/p>\n<p>The lines are not compatible with 24 V industrial signals without external conditioning. Use level translators, buffers or isolated digital interfaces when connecting industrial equipment.<\/p>\n<h3>Two 24-Bit Counter\/Timers<\/h3>\n<p>Two general-purpose 24-bit counter\/timers use a 20 MHz timebase. They support event counting, pulse generation, frequency measurement, period measurement and pulse-width measurement.<\/p>\n<p>The counters can generate clocks and trigger signals for waveform tasks or external equipment. Counter routing is software configurable through NI-DAQmx.<\/p>\n<h3>Digital Triggering<\/h3>\n<p>A digital start trigger can initiate waveform generation at a defined hardware event. Triggering provides a more repeatable start time than issuing separate software commands.<\/p>\n<p>Trigger sources can be routed from front-panel programmable function terminals or compatible PXI backplane lines. Confirm that the selected route is not reserved by another module.<\/p>\n<h3>External Update Clocking<\/h3>\n<p>An external clock can determine when the PXI-6713 outputs accept new samples. This allows waveform generation to follow another instrument, controller or experimental timing source.<\/p>\n<p>The external clock must satisfy the specified voltage, pulse-width and frequency requirements. Shielded wiring and suitable termination help maintain signal integrity.<\/p>\n<h3>PXI Backplane Synchronization<\/h3>\n<p>The module can share triggers and reference timing through the PXI chassis backplane. Multiple PXI-6713 modules can therefore be coordinated to increase the number of synchronized analog outputs.<\/p>\n<p>Correct synchronization requires explicit clock and trigger routing in NI-DAQmx. Slave generation tasks should normally be armed before the master task issues the start trigger.<\/p>\n<h3>Typical PXI-6713 Applications<\/h3>\n<ul>\n<li>Multichannel arbitrary waveform generation<\/li>\n<li>Sensor and signal simulation<\/li>\n<li>Hardware-in-the-loop testing<\/li>\n<li>Stimulus-response testing<\/li>\n<li>Power-supply programming<\/li>\n<li>Electronic load control<\/li>\n<li>High-speed deterministic control<\/li>\n<li>PID control experiments<\/li>\n<li>Multiaxis actuator command generation<\/li>\n<li>\u0410\u0432\u0442\u043e\u043c\u0430\u0442\u0438\u0437\u0438\u0440\u043e\u0432\u0430\u043d\u043d\u043e\u0435 \u0438\u0441\u043f\u044b\u0442\u0430\u0442\u0435\u043b\u044c\u043d\u043e\u0435 \u043e\u0431\u043e\u0440\u0443\u0434\u043e\u0432\u0430\u043d\u0438\u0435<\/li>\n<li>Production functional testing<\/li>\n<li>Laboratory automation<\/li>\n<li>Phase-related signal generation<\/li>\n<\/ul>\n<h3>Hardware-in-the-Loop Testing<\/h3>\n<p>The PXI-6713 can reproduce voltage signals expected from sensors and subsystems during HIL testing. Eight channels allow a single module to simulate several related signals with synchronized timing.<\/p>\n<p>Test software can modify amplitude, frequency and phase or insert ramps, dropouts and other fault conditions. External protection is recommended when connecting to powered controller inputs.<\/p>\n<h3>Automated Production Testing<\/h3>\n<p>In a production system, the module can supply stimulus voltages and programmable control levels to a device under test. Digital and counter channels can coordinate fixture and trigger operations.<\/p>\n<p>Hardware-timed generation improves repeatability between tested units and reduces dependence on software execution timing.<\/p>\n<h3>Laboratory Waveform Generation<\/h3>\n<p>The eight channels can replace multiple low-frequency benchtop generators in applications that fit the module\u2019s voltage, update-rate and accuracy specifications. Common or custom waveforms can be configured through one software interface.<\/p>\n<p>The PXI-6713 is not intended to replace RF or high-frequency arbitrary waveform generators. Its primary strengths are multichannel density, synchronized output and PXI integration.<\/p>\n<h3>NI-DAQmx Software Support<\/h3>\n<p>The PXI-6713 is controlled through the NI-DAQmx driver. NI-DAQmx supports static voltage writes, finite and continuous generation, waveform regeneration, digital I\/O, counters, external clocking and trigger routing.<\/p>\n<p>Applications can be developed using LabVIEW, LabWindows\/CVI, C\/C++ and compatible .NET environments. NI Measurement &amp; Automation Explorer can identify the module and perform basic diagnostic operations.<\/p>\n<h3>PXI-6713 Lifecycle and Replacement<\/h3>\n<p>The PXI-6713 is discontinued and listed by NI with limited support. It remains useful for maintaining established PXI systems that depend on its 68-pin wiring, output timing and NI-DAQmx configuration.<\/p>\n<p>NI recommends the <a href=\"https:\/\/pxisource.com\/ru\/product\/pxie-6738\/\">PXIe-6738<\/a>, part number 783800-01, as a replacement. The newer module provides 32 outputs, 16-bit resolution and a PXI Express interface but is not a direct wiring replacement.<\/p>\n<h3>PXI-6713 Troubleshooting<\/h3>\n<h4>The PXI-6713 is not detected in NI MAX<\/h4>\n<p>Confirm that the module is fully installed in a compatible PXI or PXI hybrid slot. Check chassis power, controller communication and NI-DAQmx installation, then restart the system.<\/p>\n<h4>An analog output remains at 0 V<\/h4>\n<p>Verify the selected physical channel, wiring and task configuration. Check whether the task is waiting for a digital trigger that has not occurred.<\/p>\n<h4>The output amplitude is incorrect<\/h4>\n<p>Confirm the programmed voltage and whether the output uses the onboard or external reference. Check the external reference amplitude and the connected load impedance.<\/p>\n<h4>The output cannot drive the connected load<\/h4>\n<p>The output current is limited to approximately \u00b15 mA. Use an external buffer or power amplifier when the load impedance requires more current.<\/p>\n<h4>The waveform becomes distorted at higher frequencies<\/h4>\n<p>Check the number of samples per period, update rate, cable capacitance and load impedance. Allow sufficient settling time after large voltage transitions.<\/p>\n<h4>Eight-channel generation is slower than expected<\/h4>\n<p>With all eight channels active, the maximum documented rate is approximately 740 kS\/s per channel using onboard regeneration or 769 kS\/s per channel using host memory under the documented conditions.<\/p>\n<h4>Continuous generation stops with a buffer-underflow error<\/h4>\n<p>Increase the software buffer, write larger data blocks and avoid slow processing in the generation loop. Use onboard regeneration when the waveform repeats.<\/p>\n<h4>The channels do not start simultaneously<\/h4>\n<p>Configure all required channels in one hardware-timed analog output task. Using separate software-timed tasks does not guarantee simultaneous starting or updating.<\/p>\n<h4>Multiple modules are not synchronized<\/h4>\n<p>Configure a common PXI reference clock and start trigger. Start the slave tasks before the master produces the trigger and verify that the selected backplane routes are available.<\/p>\n<h4>A digital line cannot operate a 24 V device<\/h4>\n<p>The digital lines use 5 V TTL\/CMOS levels. Add a suitable level translator, relay driver or isolated interface for 24 V industrial signals.<\/p>\n<h3>PXI-6713 Comparison with Similar Analog Output Modules<\/h3>\n<table>\n<tbody>\n<tr>\n<th>\u041c\u043e\u0434\u0435\u043b\u044c<\/th>\n<th>Analog Outputs<\/th>\n<th>\u0420\u0430\u0437\u0440\u0435\u0448\u0435\u043d\u0438\u0435<\/th>\n<th>Maximum Update Rate<\/th>\n<th>Best Suited For<\/th>\n<\/tr>\n<tr>\n<td>PXI-6711<\/td>\n<td>4<\/td>\n<td>12 bits<\/td>\n<td>1 \u041c\u0432\u044b\u0431\/\u0441\/\u043a\u043d<\/td>\n<td>Four-channel high-speed waveform generation<\/td>\n<\/tr>\n<tr>\n<td>PXI-6713<\/td>\n<td>8<\/td>\n<td>12 bits<\/td>\n<td>740 kS\/s to 1 MS\/s\/ch<\/td>\n<td>Eight-channel simultaneous waveform generation<\/td>\n<\/tr>\n<tr>\n<td>PXI-6722<\/td>\n<td>8<\/td>\n<td>13 bits<\/td>\n<td>Up to 800 kS\/s\/ch<\/td>\n<td>Eight channels with higher nominal resolution<\/td>\n<\/tr>\n<tr>\n<td>PXI-6723<\/td>\n<td>32<\/td>\n<td>13 bits<\/td>\n<td>Up to 800 kS\/s\/ch<\/td>\n<td>Legacy high-channel-count stimulus generation<\/td>\n<\/tr>\n<tr>\n<td>PXI-6733<\/td>\n<td>8<\/td>\n<td>16 bits<\/td>\n<td>Up to 1 MS\/s\/ch<\/td>\n<td>High-resolution eight-channel waveform generation<\/td>\n<\/tr>\n<tr>\n<td>PXIe-6738<\/td>\n<td>32<\/td>\n<td>16 bits<\/td>\n<td>Up to 1 MS\/s\/ch<\/td>\n<td>Modern high-density PXI Express systems<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>PXI-6713 vs PXI-6711<\/h3>\n<p>\u0417\u0435\u043c\u043b\u044f <a href=\"https:\/\/pxisource.com\/ru\/product\/pxi-6711\/\">PXI-6711<\/a> and PXI-6713 use similar 12-bit output architectures. The PXI-6711 provides four channels, while the PXI-6713 provides eight.<\/p>\n<p>Choose the PXI-6711 when four outputs are sufficient and every channel must run at 1 MS\/s. Choose the PXI-6713 when additional synchronized channels are required and reduced full-channel update rates are acceptable.<\/p>\n<h3>PXI-6713 vs PXI-6722<\/h3>\n<p>\u0417\u0435\u043c\u043b\u044f <a href=\"https:\/\/pxisource.com\/ru\/product\/pxi-6722\/\">PXI-6722<\/a> provides eight 13-bit outputs with update rates up to 800 kS\/s per channel. The PXI-6713 provides 12-bit resolution but can reach 1 MS\/s with up to five active channels.<\/p>\n<p>Select the PXI-6713 for faster low-channel-count generation. Select the PXI-6722 when its higher nominal resolution and eight-channel performance better match the application.<\/p>\n<h3>PXI-6713 vs PXI-6733<\/h3>\n<p>\u0417\u0435\u043c\u043b\u044f <a href=\"https:\/\/pxisource.com\/ru\/product\/pxi-6733\/\">PXI-6733<\/a> provides eight outputs with 16-bit resolution and similar high-speed waveform capability. It offers considerably finer voltage resolution than the 12-bit PXI-6713.<\/p>\n<p>The PXI-6713 is appropriate for maintaining existing 12-bit systems. Choose the PXI-6733 when higher precision is required and the application supports its hardware and accessories.<\/p>\n<h3>PXI-6713 vs PXIe-6738<\/h3>\n<p>\u0417\u0435\u043c\u043b\u044f <a href=\"https:\/\/pxisource.com\/ru\/product\/pxie-6738\/\">PXIe-6738<\/a> is the NI-recommended replacement for the discontinued PXI-6713. It provides 32 analog outputs, 16-bit resolution and a PXI Express interface.<\/p>\n<p>The PXIe-6738 offers greater resolution, current drive and channel density. Migration requires checking the chassis, connector pinout, cable accessories, software configuration and waveform timing.<\/p>\n<h3>Recommended Related Products<\/h3>\n<ul>\n<li><a href=\"https:\/\/pxisource.com\/ru\/product\/pxi-6711\/\">PXI-6711 4-Channel 12-Bit Analog Output Module<\/a><\/li>\n<li><a href=\"https:\/\/pxisource.com\/ru\/product\/pxi-6722\/\">PXI-6722 8-Channel 13-Bit Analog Output Module<\/a><\/li>\n<li><a href=\"https:\/\/pxisource.com\/ru\/product\/pxi-6723\/\">PXI-6723 32-Channel Analog Output Module<\/a><\/li>\n<li><a href=\"https:\/\/pxisource.com\/ru\/product\/pxi-6733\/\">PXI-6733 8-Channel 16-Bit Analog Output Module<\/a><\/li>\n<li><a href=\"https:\/\/pxisource.com\/ru\/product\/pxie-6738\/\">PXIe-6738 32-Channel 16-Bit Analog Output Module<\/a><\/li>\n<li><a href=\"https:\/\/pxisource.com\/ru\/product\/pxi-6704\/\">PXI-6704 Static Voltage and Current Output Module<\/a><\/li>\n<li><a href=\"https:\/\/pxisource.com\/ru\/product-category\/%d0%bd%d0%b8\/pxi-%d1%81%d0%b8%d1%81%d1%82%d0%b5%d0%bc%d1%81\/%d0%bc%d0%be%d0%b4%d1%83%d0%bb%d0%b8-pxi\/\">View More NI PXI and PXI Express Modules<\/a><\/li>\n<\/ul>\n<h3>Selecting the Right PXI Analog Output Module<\/h3>\n<p>Choose the PXI-6713 when the application requires eight simultaneous \u00b110 V outputs, 12-bit resolution, high-speed arbitrary waveform generation and integrated digital and counter functions.<\/p>\n<p>Select the PXI-6711 when only four channels are required. Choose the PXI-6733 for greater resolution, or the PXIe-6738 for a modern PXI Express platform with substantially higher output density.<\/p>\n<h3>Why Choose the PXI-6713?<\/h3>\n<ul>\n<li>Provides eight independent analog voltage outputs<\/li>\n<li>Updates all active channels simultaneously<\/li>\n<li>Supports rates up to 1 MS\/s per channel<\/li>\n<li>Generates standard and arbitrary waveforms<\/li>\n<li>Provides a standard \u00b110 V output range<\/li>\n<li>Supports an external voltage reference<\/li>\n<li>Includes a 16,384-sample waveform FIFO<\/li>\n<li>Provides eight TTL\/CMOS digital I\/O lines<\/li>\n<li>Includes two 24-bit counter\/timers<\/li>\n<li>Supports digital triggering and external clocking<\/li>\n<li>Integrates with PXI timing and NI-DAQmx<\/li>\n<\/ul>\n<h3>Frequently Asked Questions<\/h3>\n<h4>What is the PXI-6713?<\/h4>\n<p>The PXI-6713 is an eight-channel, 12-bit PXI analog voltage output module designed for synchronized waveform generation and control applications.<\/p>\n<h4>What are the PXI-6713 part numbers?<\/h4>\n<p>The documented NI part numbers include <strong>777795-01<\/strong> \u0438 <strong>185860-01<\/strong>. Confirm the required configuration when requesting a quotation.<\/p>\n<h4>How many analog outputs does the PXI-6713 provide?<\/h4>\n<p>It provides eight independent voltage output channels.<\/p>\n<h4>Does the PXI-6713 update all channels simultaneously?<\/h4>\n<p>Yes. The active analog output channels can latch new values simultaneously to preserve their timing relationships.<\/p>\n<h4>What is the maximum update rate?<\/h4>\n<p>One through five channels can update at up to 1 MS\/s per channel. With all eight channels active, the maximum documented rate is approximately 740 kS\/s per channel from onboard memory.<\/p>\n<h4>What is the analog output resolution?<\/h4>\n<p>The analog outputs provide 12-bit resolution, corresponding to 4,096 theoretical voltage levels.<\/p>\n<h4>What is the output voltage range?<\/h4>\n<p>The standard analog output range is -10 V to +10 V. The multiplying DACs also support a compatible external voltage reference.<\/p>\n<h4>What is the maximum output current?<\/h4>\n<p>Each output can drive approximately \u00b15 mA under the specified operating conditions.<\/p>\n<h4>Can the PXI-6713 generate arbitrary waveforms?<\/h4>\n<p>Yes. Users can define individual output samples to create periodic, finite or continuously changing arbitrary waveforms.<\/p>\n<h4>How much onboard waveform memory is available?<\/h4>\n<p>The PXI-6713 provides a 16,384-sample analog output FIFO.<\/p>\n<h4>Does the PXI-6713 provide analog inputs?<\/h4>\n<p>No. It is an analog output module. A separate PXI data acquisition or digitizer module is required for analog measurements.<\/p>\n<h4>How many digital I\/O lines are included?<\/h4>\n<p>The module provides eight bidirectional 5 V TTL\/CMOS-compatible digital I\/O lines.<\/p>\n<h4>How many counters are included?<\/h4>\n<p>The PXI-6713 provides two 24-bit counter\/timers with a 20 MHz timebase.<\/p>\n<h4>Which connector does the PXI-6713 use?<\/h4>\n<p>It uses a 68-pin SCSI-type front connector. Compatible options include the SH68-68-EPM cable and TB-2705 direct-connect terminal block.<\/p>\n<h4>Which software controls the PXI-6713?<\/h4>\n<p>The module is controlled through NI-DAQmx and can be used with LabVIEW, LabWindows\/CVI, C\/C++ and compatible .NET environments.<\/p>\n<h4>Is the PXI-6713 discontinued?<\/h4>\n<p>Yes. NI lists the PXI-6713 as discontinued with limited support. It may remain available through existing stock or the tested secondary market.<\/p>\n<h4>What is the recommended replacement for the PXI-6713?<\/h4>\n<p>NI recommends the PXIe-6738, part number 783800-01. It is a newer PXI Express module and is not a direct wiring replacement.<\/p>\n<h3>Request a Quote for the PXI-6713<\/h3>\n<p>Contact us for current availability, condition, lead time and project pricing for the <strong>PXI-6713 8-Channel 12-Bit Analog Output Module<\/strong>. We can also help identify compatible 68-pin cables, connector blocks, PXI chassis and modern 16-bit analog output alternatives.<\/p>","protected":false},"excerpt":{"rendered":"<p>PXI-6713 8-Channel High-Speed Analog Output Module The PXI-6713 is a high-speed PXI analog output module designed for multichannel waveform generation,<\/p>","protected":false},"featured_media":31280,"template":"","meta":{"_acf_changed":false},"product_brand":[18],"product_cat":[667],"product_tag":[],"class_list":["post-30248","product","type-product","status-publish","has-post-thumbnail","product_brand-national-instruments","product_cat-pxi-modules","first","instock","shipping-taxable","product-type-simple"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v25.0 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>NI PXI-6713 PXI Analog Output Module 777795-01, In Stock | Project Pricing<\/title>\n<meta name=\"description\" content=\"The PXI-6713 provides eight simultaneous 12-bit \u00b110 V outputs, up to 1 MS\/s updates, eight digital I\/O lines and two 24-bit counters.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/pxisource.com\/ru\/product\/pxi-6713\/\" \/>\n<meta property=\"og:locale\" content=\"ru_RU\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"PXI-6713\" \/>\n<meta property=\"og:description\" content=\"The PXI-6713 provides eight simultaneous 12-bit \u00b110 V outputs, up to 1 MS\/s updates, eight digital I\/O lines and two 24-bit counters.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/pxisource.com\/ru\/product\/pxi-6713\/\" \/>\n<meta property=\"og:site_name\" content=\"PXI Source\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61582573040385\" \/>\n<meta property=\"article:modified_time\" content=\"2026-08-30T12:32:31+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/pxisource.com\/wp-content\/uploads\/2026\/04\/PXI-6713.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"650\" \/>\n\t<meta property=\"og:image:height\" content=\"650\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u0426\u0435\u043d\u0430\" \/>\n\t<meta name=\"twitter:data1\" content=\"\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u0414\u043e\u0441\u0442\u0443\u043f\u043d\u043e\u0441\u0442\u044c\" \/>\n\t<meta name=\"twitter:data2\" content=\"\u0412 \u043d\u0430\u043b\u0438\u0447\u0438\u0438\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/pxisource.com\\\/product\\\/pxi-6713\\\/\",\"url\":\"https:\\\/\\\/pxisource.com\\\/product\\\/pxi-6713\\\/\",\"name\":\"NI PXI-6713 PXI Analog Output Module 777795-01, In Stock | Project Pricing\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/pxisource.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/pxisource.com\\\/product\\\/pxi-6713\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/pxisource.com\\\/product\\\/pxi-6713\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/pxisource.com\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/PXI-6713.webp\",\"datePublished\":\"2025-09-26T05:06:35+00:00\",\"dateModified\":\"2026-08-30T12:32:31+00:00\",\"description\":\"The PXI-6713 provides eight simultaneous 12-bit \u00b110 V outputs, up to 1 MS\\\/s updates, eight digital I\\\/O lines and two 24-bit counters.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/pxisource.com\\\/product\\\/pxi-6713\\\/#breadcrumb\"},\"inLanguage\":\"ru-RU\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/pxisource.com\\\/product\\\/pxi-6713\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ru-RU\",\"@id\":\"https:\\\/\\\/pxisource.com\\\/product\\\/pxi-6713\\\/#primaryimage\",\"url\":\"https:\\\/\\\/pxisource.com\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/PXI-6713.webp\",\"contentUrl\":\"https:\\\/\\\/pxisource.com\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/PXI-6713.webp\",\"width\":650,\"height\":650,\"caption\":\"PXI-6713\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/pxisource.com\\\/product\\\/pxi-6713\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/pxisource.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"\u5546\u5e97\",\"item\":\"https:\\\/\\\/pxisource.com\\\/shop\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"PXI-6713\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/pxisource.com\\\/#website\",\"url\":\"https:\\\/\\\/pxisource.com\\\/\",\"name\":\"PXI Systems\",\"description\":\"PXI, PXIe and Modular Test Equipment\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/pxisource.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ru-RU\"}]}<\/script>\n<meta property=\"product:brand\" content=\"National Instruments\" \/>\n<meta property=\"product:price:currency\" content=\"USD\" \/>\n<meta property=\"og:availability\" content=\"instock\" \/>\n<meta property=\"product:availability\" content=\"instock\" \/>\n<meta property=\"product:condition\" content=\"new\" \/>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"NI PXI-6713 PXI Analog Output Module 777795-01, In Stock | Project Pricing","description":"The PXI-6713 provides eight simultaneous 12-bit \u00b110 V outputs, up to 1 MS\/s updates, eight digital I\/O lines and two 24-bit counters.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/pxisource.com\/ru\/product\/pxi-6713\/","og_locale":"ru_RU","og_type":"article","og_title":"PXI-6713","og_description":"The PXI-6713 provides eight simultaneous 12-bit \u00b110 V outputs, up to 1 MS\/s updates, eight digital I\/O lines and two 24-bit counters.","og_url":"https:\/\/pxisource.com\/ru\/product\/pxi-6713\/","og_site_name":"PXI Source","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61582573040385","article_modified_time":"2026-08-30T12:32:31+00:00","og_image":[{"width":650,"height":650,"url":"https:\/\/pxisource.com\/wp-content\/uploads\/2026\/04\/PXI-6713.webp","type":"image\/webp"}],"twitter_card":"summary_large_image","twitter_misc":{"\u0426\u0435\u043d\u0430":"","\u0414\u043e\u0441\u0442\u0443\u043f\u043d\u043e\u0441\u0442\u044c":"\u0412 \u043d\u0430\u043b\u0438\u0447\u0438\u0438"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/pxisource.com\/product\/pxi-6713\/","url":"https:\/\/pxisource.com\/product\/pxi-6713\/","name":"NI PXI-6713 PXI Analog Output Module 777795-01, In Stock | Project Pricing","isPartOf":{"@id":"https:\/\/pxisource.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/pxisource.com\/product\/pxi-6713\/#primaryimage"},"image":{"@id":"https:\/\/pxisource.com\/product\/pxi-6713\/#primaryimage"},"thumbnailUrl":"https:\/\/pxisource.com\/wp-content\/uploads\/2026\/04\/PXI-6713.webp","datePublished":"2025-09-26T05:06:35+00:00","dateModified":"2026-08-30T12:32:31+00:00","description":"The PXI-6713 provides eight simultaneous 12-bit \u00b110 V outputs, up to 1 MS\/s updates, eight digital I\/O lines and two 24-bit counters.","breadcrumb":{"@id":"https:\/\/pxisource.com\/product\/pxi-6713\/#breadcrumb"},"inLanguage":"ru-RU","potentialAction":[{"@type":"ReadAction","target":["https:\/\/pxisource.com\/product\/pxi-6713\/"]}]},{"@type":"ImageObject","inLanguage":"ru-RU","@id":"https:\/\/pxisource.com\/product\/pxi-6713\/#primaryimage","url":"https:\/\/pxisource.com\/wp-content\/uploads\/2026\/04\/PXI-6713.webp","contentUrl":"https:\/\/pxisource.com\/wp-content\/uploads\/2026\/04\/PXI-6713.webp","width":650,"height":650,"caption":"PXI-6713"},{"@type":"BreadcrumbList","@id":"https:\/\/pxisource.com\/product\/pxi-6713\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/pxisource.com\/"},{"@type":"ListItem","position":2,"name":"\u5546\u5e97","item":"https:\/\/pxisource.com\/shop\/"},{"@type":"ListItem","position":3,"name":"PXI-6713"}]},{"@type":"WebSite","@id":"https:\/\/pxisource.com\/#website","url":"https:\/\/pxisource.com\/","name":"\u0421\u0438\u0441\u0442\u0435\u043c\u044b PXI","description":"PXI, PXIe and Modular Test Equipment","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/pxisource.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ru-RU"}]},"product_brand":"National Instruments","product_price_currency":"USD","og_availability":"instock","product_availability":"instock","product_condition":"new"},"_links":{"self":[{"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/product\/30248","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"version-history":[{"count":4,"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/product\/30248\/revisions"}],"predecessor-version":[{"id":35768,"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/product\/30248\/revisions\/35768"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/media\/31280"}],"wp:attachment":[{"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/media?parent=30248"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/product_brand?post=30248"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/product_cat?post=30248"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/pxisource.com\/ru\/wp-json\/wp\/v2\/product_tag?post=30248"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}